Miscellaneous Parts By Russell Performance |
|
CUSHION CLAMPS
For the optimum method of securing hoses to frames or boat runners, mechanics choose Russell Cushion Clamps. The spring steel tab mount with the rubber covered hose loop provides a rigid vibration-absorbing mount for hoses and/or tubing. |
 |
Application |
Quantity |
Part # |
Holds -4 AN Hose |
10 |
650970 |
Holds -6 AN Hose |
10 |
650980 |
Holds -8 AN Hose |
6 |
650990 |
Holds -10 AN Hose |
6 |
651000 |
Holds -12 AN Hose |
6 |
651010 |
|
|
PLASTIC AN CAPS
Use these convenient caps and plugs to prevent leaks after disassembly. For temporary use only, remove before vehicle operation. |
 |
Application |
Quantity |
Part # |
-3 AN Plastic Cap |
10 |
645500 |
-4 AN Plastic Cap |
10 |
645510 |
-6 AN Plastic Cap |
10 |
645520 |
-8 AN Plastic Cap |
10 |
645530 |
-10 AN Plastic Cap |
10 |
645540 |
-12 AN Plastic Cap |
10 |
645550 |
Assortment of Caps and Plugs |
- |
645560 |
|
|
PLASTIC AN CAPS
Use these convenient caps and plugs to prevent leaks after disassembly. For temporary use only, remove before vehicle operation. |
 |
Application |
Quantity |
Part # |
-3 AN Plastic Plug |
10 |
645501 |
-4 AN Plastic Plug |
10 |
645511 |
-6 AN Plastic Plug |
10 |
645521 |
-8 AN Plastic Plug |
10 |
645531 |
-10 AN Plastic Plug |
10 |
645541 |
-12 AN Plastic Plug |
10 |
645551 |
Assortment of Caps and Plugs |
- |
645560 |
|
|
HOSE & FITTING ASSEMBLY LUBE AND SEALANT KIT
Precision Hose and Fitting Assembly Lube allows easy assembly and disassembly of hose ends. Our Assembly Lube will not damage the inner liner of the hose and prevents galling of hose ends during assembly. The Anti-Seize Thread Sealant provides an instant seal on pipe threads and eliminates the use of PTFE tape. This sealant has a temperature range from -60° to +600° F and can be used as a gasket and flange sealant. |
 |
Application |
Part # |
Assembly Lube/Sealant Kit |
671570 |
|
|
RUSSELL SAFETY WIRE
Russell Safety Wire comes in a 1-lb. spool of .32-gauge stainless steel wire, for ease of use. |
 |
Application |
Part # |
.032-Gauge Stainless Steel Wire, 1-lb. Spool |
671580 |
|
|
FIRE JACKET
Designed to insulate hoses that run in sustained high temperature areas, fire jackets are manufactured from smooth, silicone-coated glass material that provides heat resistance and short-term direct flame protection. |
 |
Application |
Length |
Part # |
-6 AN Fire Jacket |
10" |
683800 |
-6 AN Fire Jacket |
20" |
683810 |
-8 AN Fire Jacket |
10" |
683820 |
-8 AN Fire Jacket |
20" |
683830 |
-10 AN Fire Jacket |
10" |
683840 |
-10 AN Fire Jacket |
20" |
683850 |
-12 AN Fire Jacket |
10" |
683860 |
-12 AN Fire Jacket |
20" |
683870 |
|
|
WRAP-IT FOR MAXIMUM WIRE & HOSE PROTECTION
Wrap-It is a self-wrapping, lightweight oversleeve that reduces chafing, cutting and abrading of wires and hoses. The self-wrapping feature allows for quick and easy installation and removal for assembly and/or maintenance without the need for any special tools. |
 |
Application |
Length |
Part # |
3/16" Wire and Hose Protection |
3" |
629050 |
3/16" Wire and Hose Protection |
10" |
629060 |
5/16" Wire and Hose Protection |
3" |
629080 |
5/16" Wire and Hose Protection |
10" |
629090 |
1/2" Wire and Hose Protection |
3" |
629110 |
1/2" Wire and Hose Protection |
10" |
629120 |
3/4" Wire and Hose Protection |
3" |
629140 |
3/4" Wire and Hose Protection |
10" |
629150 |
1" Wire and Hose Protection |
3" |
629170 |
1" Wire and Hose Protection |
10" |
629180 |
|
|
INNER COILS
These Inner Coils can be inserted into Russell ProClassic Hose to prevent collapsing caused by vacuum, sharp turns, etc. For use with ProClassic Hose, please view ProClassic Section. |
 |
Application |
Length |
Part # |
-12 AN Inner Coils |
4" |
651312 |
-16 AN Inner Coils |
4" |
651316 |
|
|