Service Parts By Russell Performance


TEFLON WASHERS
Replacement teflon washers for Russell Performance Bulkhead Fittings.
Teflon Washers by Russell Performance Products
Application Quantity Part #
-6 AN Teflon Washers 10 651206
-8 AN Teflon Washers 10 651208
-10 AN Teflon Washers 10 651210
-12 AN Teflon Washers 10 651212

COPPER CRUSH WASHERS
For use with Edelbrock Billet Fuel Pumps, Carter and CV Pumps.
Copper Crush Washers by Russell Performance Products
Application Quantity Part #
Copper Crush Washers for use with 5/8-18 Male Fitting 2 640990

VITON® AND FLUOROSILICONE O-RINGS
Replacement O-rings for use with dry sump fittings, straight threaded AN plugs and flare unions. Viton O-rings are compatible with gasoline. Fluorosilicone O-rings offer superior sealing and are the best choice for use with ethylene glycol, motor oil and methanol.
Viton & Flourosilicone O-Rings by Russell Performance Products
Application Quantity Part #
-4 AN Viton O-Rings 10 651030
-6 AN Viton O-Rings 10 651040
-8 AN Viton O-Rings 10 651050
-10 AN Viton O-Rings 10 651060
-12 AN Viton O-Rings 10 651070
-16 AN Viton O-Rings 10 651080
-4 AN Fluorosilicone O-Rings 10 651031
-6 AN Fluorosilicone O-Rings 10 651041
-8 AN Fluorosilicone O-Rings 10 651051
-10 AN Fluorosilicone O-Rings 10 651061
-12 AN Fluorosilicone O-Rings 10 651071
-16 AN Fluorosilicone O-Rings 10 651081

BRAKE CRUSH WASHERS
When changing brake hoses, always replace the sealing washers that are used with Russell's Street Legal brake hoses.
Brake Crush Washers by Russell Performance Products
Application Quantity Part #
10mm - 3/8" Brake Hose Washers 10 683980
12mm - 7/16" Brake Hose Washers 10 683990

CARBURETOR FITTING SEALING WASHERS
When changing brake hoses, always replace the sealing washers that are used with Russell's Street Legal brake hoses.
Carburetor Fitting Sealing Washers by Russell Performance Products
Application Quantity Part #
Use with Holley & Demon 9/16" -24 Carb Fittings 2 645210
Use with Holley & Quadrajet 7/8" -20 Carb Fittings 2 645220
Use with Edelbrock & Carter 5/8" -20 Carb Fittings 2 645230
Use with Quadrajet 1" -20 Carb Fittings 2 645240

STAT-O-SEALS
Russell Stat-O-Seals are manufactured with a Buna rubber o-ring mechanically bonded to the inside diameter of an aluminum washer. When tightened, the o-ring seal is compressed, forming a positive seal around the bolt shank.
Stat-O-Seals by Russell Performance Products
Application I.D. Quantity Part #
-3 AN Stat-O-Seals 3/8" 2 683880
-4 AN Stat-O-Seals 7/16" 2 683890
-6 AN Stat-O-Seals 9/16" 2 683900
-8 AN Stat-O-Seals 3/4" 2 683910
-10 AN Stat-O-Seals 7/8" 2 683920