RUSSELL PERFORMANCE UNIVERSAL FUEL HOSE KITS |
 |
|
|
|
CHECK VALVES
Engineered to allow flow in one direction and prevent flow back, Russell check valves feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. Low opening pressure (3 psi) makes these valves ideal for fuel systems. Available in -6 and -8 in black anodized body. |
 |
| DESCRIPTION |
PART # |
| -6 AN male to -6 AN male |
650603 |
| -8 AN male to -8 AN male |
650613 |
|
|
PRE-FITTED FUEL PUMP TO CARBURETER KITS
Designed to replace your original fuel line these fuel pump to carb kits fit most GM applications. Kits include Big Bore Carb Bowl Fitting, Fuel Pump Adapter, two Full Flow Hose Ends and a pre-cut length of -6 AN ProFlex Hose. These kits are offered in the traditional red/blue anodized finish only. |
 |
| DESCRIPTION |
PART # |
| 1974 and Later GM Product with Quadrajet (2-1/2' in length) |
641020 |
| GM product for use with Kit No. 641090 (2' in length) |
641030 |
| Universal Tube Seal Ends (3' in length) |
641050 |
| Universal fuel pump to carb. Tube seal ends. (3 ft. length) |
641053 |
|
|
PRE-FITTED FUEL PUMP TO CARBURETER KITS
Designed to use with Russell's -8 AN Dual Inlet Kits, the Fuel Pump to Carb Kit is constructed of ProFlex Stainless Steel Braided Hose. Extra adapters and 4 ft. of -8 hose are included to work with most aftermarket high volume engine mounted pumps. |
 |
| DESCRIPTION |
PART # |
| Holley - Fuel Pump to -8 Dual Inlet Kit (For ProFlex -4' hose) |
639400 |
|
|
TUNNEL RAM KIT
Russell's Tunnel Ram Kit is designed for "high rise" or tunnel ram manifolds with dual carburetors. This kit offers a 3/8" NPT female Y-Block inlet/outlet including two big bore carb bowl fittings, four Full Flow Hose Ends and two 18" lengths of -6 AN ProFlex Hose. |
 |
| DESCRIPTION |
PART # |
| Holley Tunnel Ram Kit for 600/660 Carbs |
650020 |
| Edelbrock Tunnel Ram Kit for Performer Series Carbs |
650080 |
|
|
DUAL FEED BALANCED CARB KIT FOR HOLLEY CARBS
Russell's Dual Feed Balanced Carb Kit delivers high volumes of fuel. The fuel block features a 3/8" NPT female inlet/outlet. This kit includes two big bore carburetor bowl fittings, four Full Flow Hose Ends and two 8" lengths of -6 AN ProFlex Hose. |
 |
| DESCRIPTION |
PART # |
| 7/8" -20 Inlet Balanced Carburetor Kit for Holley 4150 Series Carbs |
650010 |
|
Assembled Carb Inlet Kits
